This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Experimental gamepad support in r2047
#11
He means that if you try to assign with the Dpad(Arrows) or the Analog stick(the joystick) even with xbox 360 controller it doesn't accept the controls add-on
Processor: AMD Phenom II X4 970 3.7 GHz, GPU: Geforce GTX 550 Ti, Ram: 16 GB, Windows 7 64-bit
Reply
#12
(03-29-2011, 03:14 AM)beanclr Wrote: You could just buy a cheap ati card. It would make it move much faster then just waiting for the emu. Might be years before it can play at full speed on on-board cards.

Mine is integrated in a laptop so no dice. My i5 doesn't get loaded down at all. I think the gpu should be able to run the emulator. I can play Street Fighter 4 with mid level settings, and most newer games. It just doesn't like something in JPCSP, I think anyway.
Reply
#13
Well whats your shader. I think you need 4.0 shader to play. At least thats what I was told.
One more time!
Reply
#14
gid15,

Congratulations, great job! Smile (for me JPCSP already uses D-Pad and Analog stick, other buttons i set manually)

Got these messages in God of War: Chains of Olympus (looks like second Analog stick is too sensitive Big Grin )
Code:
...
36892 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
36958 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37123 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37156 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37222 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37288 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37453 [DiscSpinnerThread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37486 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37552 [DiscSpinnerThread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37618 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37785 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37818 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
37884 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
37950 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
38116 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
38149 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
38218 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
38251 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
38386 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,015885
38463 [user_main] WARN  hle - Unknown Controller Event on Z Rotation(rz): 0,000015
38485 [user_main] WARN  hle - Unknown Controller Event on Z Rotation(rz): 0,007950
38485 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,031754
38551 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,039689
38585 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Rotation(rz): 0,015885
38585 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,031754
38653 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,007950
38686 [snd_stream_service_thread_0] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
38719 [user_main] WARN  hle - Unknown Controller Event on Z Rotation(rz): 0,000015
38888 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
38922 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
38991 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
39024 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
39157 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
39190 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
39520 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
39586 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
39652 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
39685 [user_main] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
39817 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
39916 [snd_tick_timer_thread] WARN  hle - Unknown Controller Event on Z Axis(z): 0,000015
39982 [DiscSpinnerThread] WARN  hle - Unknown Controller Event on Z Axis(z): -0,000015
...


Attached Files Thumbnail(s)
   
Reply
#15
(03-29-2011, 03:30 AM)Vegerunks Wrote: He means that if you try to assign with the Dpad(Arrows) or the Analog stick(the joystick) even with xbox 360 controller it doesn't accept the controls add-on
Right, I forgot to mention that the controls for the arrows and the analog stick are hardcoded and cannot be configured. I will improve this and make them configurable too.
Reply
#16
I forgot to DualShock3 gamepad - I use the drivers http://www.motioninjoy.com/

is work by bluetooth or usb Tongue

And posible Configuration :

- PS1 Mode No joysticks
- PS2 Mode POV and joystick
- Ps2 mode POV and joysticks and triggers
- PS3 mode for enabled inclination sensor (not work on jpcsp).
- Emulate xbox360 wireless drivers (if better for some buttons)
- Custom mode If Maped keys for emulate mouse/keyboard or other input (Recomended for now if not work analogics or others buttons)

[Image: 24mdyzt.jpg]

[Image: efnixh.jpg]
[Image: 1388267.png]
Reply
#17
(03-29-2011, 06:48 AM)gid15 Wrote:
(03-29-2011, 03:30 AM)Vegerunks Wrote: He means that if you try to assign with the Dpad(Arrows) or the Analog stick(the joystick) even with xbox 360 controller it doesn't accept the controls add-on
Right, I forgot to mention that the controls for the arrows and the analog stick are hardcoded and cannot be configured. I will improve this and make them configurable too.
The arrows and analog stick can now be freely configured in r2050.
Reply
#18
Great job gid15 Big Grin is work now with dualshock3

in the logger secundary Analog Not asigned button but in the pulse in the gameplay Similar problem BlackDaemon issue

Code:
64139 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Rotación Z(rz): 0,190478
64139 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Eje Z(z): 0,396811
64140 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Rotación Z(rz): 0,198413
64141 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Eje Z(z): 0,412680
64161 [SQEXTEC Movie Decode] WARN  controller - Unknown Controller Event on Rotación Z(rz): 0,206348
64161 [SQEXTEC Movie Decode] WARN  controller - Unknown Controller Event on Eje Z(z): 0,420615
64162 [SQEXTEC Movie Decode] WARN  controller - Unknown Controller Event on Rotación Z(rz): 0,198413
64178 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Eje Z(z): 0,428580
64202 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Eje Z(z): 0,420615
64219 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Rotación Z(rz): 0,174609
64220 [SQEXTEC Movie AudioOutput] WARN  controller - Unknown Controller Event on Eje Z(z): 0,238086


[Image: 33zae6x.jpg]

Buttons X , O , triangle , square not view correct in the control but detect perfect Smile
[Image: 1388267.png]
Reply
#19
Reporting with r2050, it works perfectly now some buttons are detected with 9,10,11 instead of Button 9 ,Button 10 and so on but it works flawlessly.

Good job gid15 !!!
CPU: Intel C2D E8500 @4.2 GHZ GPU: MSI Radeon 6870 Twin Frozr II 1024MB (920/1050)
RAM: 2x2GB Corsair Dominator DDR2-1066 5-5-5-15
Reply
#20
Thanks gid15, gamepad support is wonderful. I have a suggestion to make the interaction even better: allow gamepads to be able to control save/load menus. (Up/down buttons to highlight the save and "X" to select and "O" to cancel.)

It could benefit keyboard users as well, but is especially useful to gamepad users who usually have their hands farther away from the mouse.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)