This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raiden IV: OverKill [NPUB31371]
#1
Tested on rpcs3 commit e4eecd247c. Works very slow, and have some graphics issues. To run game make sure to set "//dev_hdd0/" path in virtual path manager and pause "Multistream" thread to gain minor speedup.

Reply
#2
That's supremely slow and broken... Do you need to have write color buffers on?
Asus N55SF, i7-2670QM (~2,8 ghz under typical load), GeForce GT 555M (only OpenGL)
Reply
#3
Yes, color buffers should be enabled, otherwise it won't display anything.
Reply
#4
rpcs3-v0.0.0.6-460-g303a109

DirectX 12
Tried PPU 2 + SPU 2, PPU Recompiler + SPU Recompiler, PPU1 / PPU2 + SPU Recompiler
Tried LLEing cellSre, cellFiber, cellSail, cellSpursJq

Can't get ingame here, I got to the menu once by chance but it crashed when trying to clicking the Start button.

Log without anything LLE'd attached.

Trying with OpenGL outputs no video at all, black screen with audio output. Happened in all the last games I tried to run with OpenGL.


Attached Files
.zip   RPCS3 (2).zip (Size: 45.47 KB / Downloads: 86)
Desktop: Ryzen 7 5800X, Radeon RX 6800 XT, 2x8G 3600MHz, Manjaro Linux
Laptop: Intel i7 6700HQ, Intel HD 530, 2x8G 2133MHz, Manjaro Linux
Old Desktop: FX-8350, R9 280X, 2x4G 1600MHz, Manjaro Linux
Reply
#5
(02-09-2016, 10:21 PM)Annie Wrote: rpcs3-v0.0.0.6-460-g303a109

DirectX 12
Tried PPU 2 + SPU 2, PPU Recompiler + SPU Recompiler, PPU1 / PPU2 + SPU Recompiler
Tried LLEing cellSre, cellFiber, cellSail, cellSpursJq

Can't get ingame here, I got to the menu once by chance but it crashed when trying to clicking the Start button.

Log without anything LLE'd attached.

Trying with OpenGL outputs no video at all, black screen with audio output. Happened in all the last games I tried to run with OpenGL.

If you're having consistent failure using OpenGL backend, could you post a copy of the OpenGL log output please? Also, a description of your GPU hardware setup and drivers.
Reply
#6
(02-10-2016, 05:58 PM)kd-11 Wrote:
(02-09-2016, 10:21 PM)Annie Wrote: rpcs3-v0.0.0.6-460-g303a109

DirectX 12
Tried PPU 2 + SPU 2, PPU Recompiler + SPU Recompiler, PPU1 / PPU2 + SPU Recompiler
Tried LLEing cellSre, cellFiber, cellSail, cellSpursJq

Can't get ingame here, I got to the menu once by chance but it crashed when trying to clicking the Start button.

Log without anything LLE'd attached.

Trying with OpenGL outputs no video at all, black screen with audio output. Happened in all the last games I tried to run with OpenGL.

If you're having consistent failure using OpenGL backend, could you post a copy of the OpenGL log output please? Also, a description of your GPU hardware setup and drivers.

Sure,
Attached the log with and three different games running on OpenGL who output video on DX12 but not on openGL.
They do output the audio tho (on both dx12 and opengl).

Code:
Radeon Software Version - 15.12
Radeon Software Edition - Crimson
Graphics Chipset - AMD Radeon R9 200 Series
Memory Size - 3072 MB
Memory Type - GDDR5
Core Clock - 1020 MHz
Windows Version - Windows 10
System Memory - 8 GB
CPU Type - AMD FX(tm)-8350 Eight-Core Processor
Code:
Radeon Settings Version - 2015.1204.1216.22046
Driver Packaging Version - 15.30.1025.1001-151204a-296874C
Provider - Advanced Micro Devices, Inc.
2D Driver Version - 8.1.1.1533
Direct3D® Version - 9.14.10.1162
OpenGL® Version - 6.14.10.13416
OpenCL™ Version - 2.0.4.0
AMD Mantle Version - 9.1.10.99
AMD Mantle API Version - 98309
AMD Audio Driver Version - 10.0.0.2
Code:
Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - AMD Radeon R9 200 Series
Device ID - 6798
Vendor ID - 1002
SubSystem ID - 2775
SubSystem Vendor ID - 1462
Revision ID - 00
Bus Type - PCI Express 3.0
Current Bus Settings - PCI Express 2.0 x16
BIOS Version - 015.042.000.000
BIOS Date - 2013/12/04 05:04
Memory Size - 3072 MB
Memory Type - GDDR5
Memory Clock - 1500 MHz
Core Clock - 1020 MHz
Total Memory Bandwidth - 288 GByte/s

It's a MSI R9 280X 3GB GDDR5.


Attached Files
.zip   rpcs3_openGL_BLJM61303.zip (Size: 190.15 KB / Downloads: 78)
.zip   rpcs3_openGL_NPEB01210.zip (Size: 65 KB / Downloads: 79)
.zip   rpcs3_openGL_NPUB31371.zip (Size: 88.28 KB / Downloads: 77)
Desktop: Ryzen 7 5800X, Radeon RX 6800 XT, 2x8G 3600MHz, Manjaro Linux
Laptop: Intel i7 6700HQ, Intel HD 530, 2x8G 2133MHz, Manjaro Linux
Old Desktop: FX-8350, R9 280X, 2x4G 1600MHz, Manjaro Linux
Reply
#7
(02-10-2016, 06:37 PM)Annie Wrote:
(02-10-2016, 05:58 PM)kd-11 Wrote:
(02-09-2016, 10:21 PM)Annie Wrote: rpcs3-v0.0.0.6-460-g303a109

DirectX 12
Tried PPU 2 + SPU 2, PPU Recompiler + SPU Recompiler, PPU1 / PPU2 + SPU Recompiler
Tried LLEing cellSre, cellFiber, cellSail, cellSpursJq

Can't get ingame here, I got to the menu once by chance but it crashed when trying to clicking the Start button.

Log without anything LLE'd attached.

Trying with OpenGL outputs no video at all, black screen with audio output. Happened in all the last games I tried to run with OpenGL.

If you're having consistent failure using OpenGL backend, could you post a copy of the OpenGL log output please? Also, a description of your GPU hardware setup and drivers.

Sure,
Attached the log with and three different games running on OpenGL who output video on DX12 but not on openGL.
They do output the audio tho (on both dx12 and opengl).

Code:
Radeon Software Version - 15.12
Radeon Software Edition - Crimson
Graphics Chipset - AMD Radeon R9 200 Series
Memory Size - 3072 MB
Memory Type - GDDR5
Core Clock - 1020 MHz
Windows Version - Windows 10
System Memory - 8 GB
CPU Type - AMD FX(tm)-8350 Eight-Core Processor
Code:
Radeon Settings Version - 2015.1204.1216.22046
Driver Packaging Version - 15.30.1025.1001-151204a-296874C
Provider - Advanced Micro Devices, Inc.
2D Driver Version - 8.1.1.1533
Direct3D® Version - 9.14.10.1162
OpenGL® Version - 6.14.10.13416
OpenCL™ Version - 2.0.4.0
AMD Mantle Version - 9.1.10.99
AMD Mantle API Version - 98309
AMD Audio Driver Version - 10.0.0.2
Code:
Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - AMD Radeon R9 200 Series
Device ID - 6798
Vendor ID - 1002
SubSystem ID - 2775
SubSystem Vendor ID - 1462
Revision ID - 00
Bus Type - PCI Express 3.0
Current Bus Settings - PCI Express 2.0 x16
BIOS Version - 015.042.000.000
BIOS Date - 2013/12/04 05:04
Memory Size - 3072 MB
Memory Type - GDDR5
Memory Clock - 1500 MHz
Core Clock - 1020 MHz
Total Memory Bandwidth - 288 GByte/s

It's a MSI R9 280X 3GB GDDR5.

Thanks. Should be helpful.
Reply
#8
(02-11-2016, 07:32 AM)kd-11 Wrote: Thanks. Should be helpful.

The issue was solved in the latest commits (for me at least)
Using https://github.com/Bigpet/rpcs3/releases...4-g3b7d0bc and I'm able to get video output on OpenGL on those 3 games I tested previously above.
Desktop: Ryzen 7 5800X, Radeon RX 6800 XT, 2x8G 3600MHz, Manjaro Linux
Laptop: Intel i7 6700HQ, Intel HD 530, 2x8G 2133MHz, Manjaro Linux
Old Desktop: FX-8350, R9 280X, 2x4G 1600MHz, Manjaro Linux
Reply
#9
Test on rev556, archlinux, i7 4770k, r9 fury (mesa stable 17.1.5), OpenGl.
It boots and goes ingame with gaphical glitches.
It's then very slow and glitchy.
The games speeds up after a while, then freezes with
Code:
F {rsx::thread} N2gl4glsl14link_exceptionE thrown: linkage failed: 'error: fragment shader input `tc2' has no matching output in the previous stage
On Vulkan, it segfaults immediately.
           

.zip   RPCS3-RaidenIV.zip (Size: 124.21 KB / Downloads: 85)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)