This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WinUAE 2.5.0 Beta 19
#1
New beta of the amiga emulator

Code:
- Reduced Gayle based configuration CIA memory bank size to 4096 bytes, only accesses to bfdxxx and bfexxx goes to CIA chips if Gayle.
- Reverted b19 horizontal change, I forgot that it was made to fit max overscan modes better.. (Manually adding "gfx_horizontal_tweak=8" to config file can be used as a workaround, if needed for some reason)
- RTC update in b11 was not compatible with KS 1.x.
- improved RF5C01A RTC emulation, previously KS2.0+ detected stopped clock and attempted to reset it (which is no-op because emulated clock's time is currently read-only) and after reset it finally read the time.
- RTC year value is saved differently depending on OS version, Pre-2.0: RTC year value = current year - 1900, 2.0+: year value = last 2 digits. Both methods supported when reading. WinUAE now uses pre-2.0 method if MSM clock chip (because this is the only type that KS1.x supports), 2.0+ if RF clock chip, previously always used -1900 method.
- RTC 12/24h bit emulated, this is not used by AOS.
- RTC time/date, alarm and memory data save/load to file supported (alarm time/date, note that alarm interrupt pin is not connected in Amigas, and 104 bits of memory, used mainly for A3000 SCSI settings, included with RF clock chip type). Date/time ignored when loading.
- added win32.gui_active_page=name, sets default GUI panel after emulation has been started (Old win32.gui_page = before emulation starts)
- In some situations adv. chipset may have used incompatible data stored in config file even if compatible settings was ticked.
- Syncronize clock on the fly CIA TOD adjustment is now only active if heartbeat signal (b11) is detected.
- b11 heartbeat system was not fully disabled when UAE boot rom was unavailable.
- On screen led HD/CD/NVRAM indicator is blank if device is not available (like floppies already did).

D/l it from here : http://www.winuae.net/files/b/winuae_2500b20.zip
Reply


Messages In This Thread
WinUAE 2.5.0 Beta 19 - by shadow - 10-09-2012, 08:44 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)