+- EmuNewz Network (https://www.emunewz.net/forum)
+-- Forum: Emunewz General Forum (https://www.emunewz.net/forum/forumdisplay.php?fid=75)
+--- Forum: Builds/Releases (https://www.emunewz.net/forum/forumdisplay.php?fid=77)
+--- Thread: 1802 Emulator v1.0.9 Released (/showthread.php?tid=864)
1802 Emulator v1.0.9 Released - Alastor - 04-08-2010
1802 Emulator emulates the COMX-35 computers under Windows .
Changes :
General
· Cosmicos Emulator added, the Cosmicos is a Dutch version of the Cosmac Elf see also the Retro Computing site
· Help updated with description of new features
· Changed tracing for OUT instruction to show 16 bit address value for CDP 1869/1870 OUT instructions
· Added debugger trace option for INPx and/or OUTx only
· Debbuger pause button changed to just pause CPU resolving high load issue during pause state
Cosmac Elf 2000
· Corrected errors in configuration save
Cosmac VIP
· Improved RAM mapping
· Added VP570 expansion RAM option
· Fixed hanging if 2nd keypad is used (only happened in some cases)
Cosmicos
· First version of Emulator added, with some basic software as described in the Cosmicos book by H.B. Stuurman
Cosmac Elf, Netronics Elf II, Quest Super Elf
· Temporary code removed which resulted in ‘in’ and ‘out’ being printed in the message screen
· Added menu configuration for ‘RCA Basic with Pixie output’ and ‘Eprom boards’
· Improved terminal emulation to run Eprom boards
· Added eprom board rom files
· Corrected baud rate setting when not using uart
· Corrected Screen dump / full screen buttons not being enabled
Telmac TMC-600
· Real Time Clock option added (generating an interrupt at certain intervals)
· Debug output 4, 6 and 7 changed to 8 bit, output 5 changed to 8 if address value is not used
http://www.1802emulator.hobby-site.com/index.html