+- EmuNewz Network (https://www.emunewz.net/forum)
+-- Forum: Emunewz General Forum (https://www.emunewz.net/forum/forumdisplay.php?fid=75)
+--- Forum: Builds/Releases (https://www.emunewz.net/forum/forumdisplay.php?fid=77)
+--- Thread: WinUAE v2.3.0 Beta 12 Released (/showthread.php?tid=1861)
WinUAE v2.3.0 Beta 12 Released - Alastor - 08-21-2010
Windows port of the UAE Amiga Emulator
http://eab.abime.net/showpost.php?p=694262&postcount=157
Changes :
- <drive letter>: without '\' in harddrive paths was detected as a relative path, automatically add missing '\', it was commonly used in old config files
- CD32 pad in 2-button mode usually returned non-existing 3rd button pressed
- CD32 pad in 2-button mode didn't have pullup resistor emulation (was lost when joystick pullups were removed in 2.2)
- autocorrect CD32/CDTV CDA starting position if R-W subchannel data is detected, workaround for a bug (happens on real CD32 and CDTV too) that can cause missed subchannel frames at play startup causing corrupt or missing CD+G graphics
- CD thread safety critical sections moved to common part from image mounter
- CD image mounter in play state while replacing image: state was still reported as playing
- do not enable rawinput if rawinput capable device is inserted after winuae has been started
- 2x or larger filters changed RTG hardware mouse cursor size.. (D3D + hardware RTG cursor only)
- scsi emulation always-on logging disabled, added -scsiemulog command line parameter