EmuNewz Network

Full Version: Atelier Ayesha: The Alchemist of Dusk [BLUS31152]
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4
Seems playable but can randomly crash.
((Test on RPCS3 LLVM-aef5113d))

Interpreter(fast) & Interpreter(ASMJIT)
Better in Vulkan
--------------------
Game freeze in after menu
Movie : Work
Music : Work
SaveGame : Work
LoadGame : Work
[attachment=23319]

The Log File:-
BLUS31152 - [Atelier AyeshaThe Alchemist of Dusk] - File
___________________________________
CPU:- Intel I7-6800K @ 3.40 GHz (OverClock 4.5 GHz)
GPU:- GTX 1080
Motherboards:- ASUS X-99A-II
RAM:- 32.0 GB (2666 MHz)
Should be playable as of this PR. Someone confirm?
I am personally only getting a black screen. But I am also trying to use an undub version. That may or may not affect results. The log file is also exploding to over 500MB.

The console output is being spammed with

Code:
U {PPU[0x1000000]} Thread (main_thread) [0x00fd7c50]} cellFs TODO: cellFsStRead(fd=3, buf=*0x205xxxxx, size=0x10000, rsize=*0xd00ff038)

The whole "xxxxx" stuff is constantly increasing.

PPU: Interpreter (fast)
SPU: Recompiler
Vulkan
enable libfs.sprx and enable load liblv.sprx only
(04-06-2017, 11:57 AM)digitaldude Wrote: [ -> ]enable libfs.sprx and enable load liblv.sprx only

Thanks. Used these settings and both recompiler with OpenGL.

Seems like there are some problems with the shadows, but despite that it seems to run fine. Opening movie runs perfectly fine after a few seconds. Sometimes have low frames ingame (it's kind of fluctuating between 5 and 30 depending on the scene). Frames could seriously be due to my hardware or setup though, as I am also getting low fps with Persona 5, where other tests have shown at least medium fps.

Trying to load from the book ingame (using opengl) crashed the game once (log attached). After trying again loading worked fine from the main menu and using the book ingame.

With Vulkan the opening movie doesn't seem to work. Sound works completely fine, but the movie only displays a single picture every now and then.

Loading with vulkan works fine, from the main menu and from the book ingame.

No shadow problems with Vulkan.
Seems playable then, moving the thread.
(04-06-2017, 01:04 PM)Keksus Wrote: [ -> ]
(04-06-2017, 11:57 AM)digitaldude Wrote: [ -> ]enable libfs.sprx and enable load liblv.sprx only

Thanks. Used these settings and both recompiler with OpenGL.

Seems like there are some problems with the shadows, but despite that it seems to run fine. Opening movie runs perfectly fine after a few seconds. Sometimes have low frames ingame (it's kind of fluctuating between 5 and 30 depending on the scene). Frames could seriously be due to my hardware or setup though, as I am also getting low fps with Persona 5, where other tests have shown at least medium fps.

Trying to load from the book ingame (using opengl) crashed the game once (log attached). After trying again loading worked fine from the main menu and using the book ingame.

With Vulkan the opening movie doesn't seem to work. Sound works completely fine, but the movie only displays a single picture every now and then.

Loading with vulkan works fine, from the main menu and from the book ingame.

No shadow problems with Vulkan.

Sorry for asking same problem, I got same problem like you with black screen and log file keep increase until 2GB, and spam like you say before.

I curious from reply enable digitaldude, Why in my rpcs3 doesn't have liblv.sprx ?? already try liblv2.sprx & libfs.sprx,(OpenGL, Vulkan Crash), Interpreter(fast), Recompiler(ASMJIT), still blank & spam code.

I download last version rpcs3, already Install Firmware, Intel ® Core ™ i5-2320 CPU@3.00Ghz, RAM 8GB, OpenGL Version 4.4 and attribute like dxwebsetup & vc_redist.x86/64.
(04-25-2017, 01:21 PM)blackarch Wrote: [ -> ]
(04-06-2017, 01:04 PM)Keksus Wrote: [ -> ]
(04-06-2017, 11:57 AM)digitaldude Wrote: [ -> ]enable libfs.sprx and enable load liblv.sprx only

Thanks. Used these settings and both recompiler with OpenGL.

Seems like there are some problems with the shadows, but despite that it seems to run fine. Opening movie runs perfectly fine after a few seconds. Sometimes have low frames ingame (it's kind of fluctuating between 5 and 30 depending on the scene). Frames could seriously be due to my hardware or setup though, as I am also getting low fps with Persona 5, where other tests have shown at least medium fps.

Trying to load from the book ingame (using opengl) crashed the game once (log attached). After trying again loading worked fine from the main menu and using the book ingame.

With Vulkan the opening movie doesn't seem to work. Sound works completely fine, but the movie only displays a single picture every now and then.

Loading with vulkan works fine, from the main menu and from the book ingame.

No shadow problems with Vulkan.

Sorry for asking same problem, I got same problem like you with black screen and log file keep increase until 2GB, and spam like you say before.

I curious from reply enable digitaldude, Why in my rpcs3 doesn't have liblv.sprx ?? already try liblv2.sprx & libfs.sprx,(OpenGL, Vulkan Crash), Interpreter(fast), Recompiler(ASMJIT), still blank & spam code.

I download last version rpcs3, already Install Firmware, Intel ® Core ™ i5-2320 CPU@3.00Ghz, RAM 8GB, OpenGL Version 4.4 and attribute like dxwebsetup & vc_redist.x86/64.

The settings menu was changed... Do this now:
[Image: LChJ9rY.png]
(04-25-2017, 04:55 PM)ssshadow Wrote: [ -> ]
(04-25-2017, 01:21 PM)blackarch Wrote: [ -> ]
(04-06-2017, 01:04 PM)Keksus Wrote: [ -> ]
(04-06-2017, 11:57 AM)digitaldude Wrote: [ -> ]enable libfs.sprx and enable load liblv.sprx only

Thanks. Used these settings and both recompiler with OpenGL.

Seems like there are some problems with the shadows, but despite that it seems to run fine. Opening movie runs perfectly fine after a few seconds. Sometimes have low frames ingame (it's kind of fluctuating between 5 and 30 depending on the scene). Frames could seriously be due to my hardware or setup though, as I am also getting low fps with Persona 5, where other tests have shown at least medium fps.

Trying to load from the book ingame (using opengl) crashed the game once (log attached). After trying again loading worked fine from the main menu and using the book ingame.

With Vulkan the opening movie doesn't seem to work. Sound works completely fine, but the movie only displays a single picture every now and then.

Loading with vulkan works fine, from the main menu and from the book ingame.

No shadow problems with Vulkan.

Sorry for asking same problem, I got same problem like you with black screen and log file keep increase until 2GB, and spam like you say before.

I curious from reply enable digitaldude, Why in my rpcs3 doesn't have liblv.sprx ?? already try liblv2.sprx & libfs.sprx,(OpenGL, Vulkan Crash), Interpreter(fast), Recompiler(ASMJIT), still blank & spam code.

I download last version rpcs3, already Install Firmware, Intel ® Core ™ i5-2320 CPU@3.00Ghz, RAM 8GB, OpenGL Version 4.4 and attribute like dxwebsetup & vc_redist.x86/64.

The settings menu was changed... Do this now:
[Image: LChJ9rY.png]
Thx for reply, i follow your instruction, but looks like your version rpcs3 different from last version.
RPCS3 v0.0.2-3-f0f8f50 Alpha
Recompiler(LLVM), Recompiler(ASMJIT), load libraries : libfs.sprx
It's convert code for some time.
after that open game and still blank and spamming this code?
Code:
U {PPU[0x1000000]} Thread (main_thread) [0x003d9190]} cellFs TODO: cellFsStRead(fd=3, buf=*0xxxxxxxx, size=0x10000, rsize=*0xd00ff038)[/code]
Pages: 1 2 3 4